STANDARD SPECIFICATIONS Pipettes have a tip length of 1.0 mm and a tip bend angle of 30 degrees. Product Code Type Specifications Example LHS, ZHS Holding OD: 120 ± 10 um ID: 25 ± 5 um Heat polished tip LISR, LISL ZISR, ZISL Injection OD: 7 ± 0.5 um ID: 5 ± 0.5 um Bevel: 30 degrees Blunt-sharp spike LBSR, LBSL ZBSR, ZBSL Embryo Biopsy OD: 30 ± 5 um ID: 28 ± 5 um Bevel: 40 degrees Heat polished tip LDS, ZDS Zona Drilling OD: 12 ± 2 um ID: 10 ± 2 um Tip: 90 degrees LCS, ZCS Zona Cutting (PZD) OD: 2-3 um (tip) Sharp point OD = outer diameter, ID = inner diameter. Injection and biopsy pipettes are available in right and left hand options so the bevel always faces the user. CUSTOM SPECIFICATIONS If the standard specifications do not suit your requirements, we can manufacture pipettes to your exact design and specifications. We maintain stocks of many different types of custom pipettes, so we may already have the pipettes you require. Here are examples of custom pipettes that we keep in stock. The specifications are the same as standard pipettes except as indicated below. Product Code Type Custom Specification(s) LHC-ID15 Holding ID = 15-20 um LHC-ID30TA35 Holding ID = 30 um, tip bend angle = 35 degrees LHC-OD100ID20 Holding OD = 100 um, ID = 15-20 um LHC-OD100TA35 Holding OD = 100 um, ID = 15 um, tip bend angle = 35 degrees LHC-OD75TA35 Holding OD = 75 um, ID = 15 um, tip bend angle = 35 degrees LHC-TA35 Holding Tip bend angle = 35 degrees LHC-TL1.5 Holding Tip length = 1.5 mm LICR-TA20 Injection Tip bend angle = 20 degrees LICR-TA25 Injection Tip bend angle = 25 degrees LICR-TA35 Injection Tip bend angle = 35 degrees LICR-ID4TL0.6 Injection ID = 4 um, tip length = 0.6 mm, tip bend angle = 30 degrees LICR-ID4TA30 Injection ID = 4 um, tip length = 0.6 mm, tip bend angle = 35 degrees LICR-BA21TL0.6 Injection OD = 6.5 um, bevel angle = 21 degrees, tip length = 0.6 mm, tip bend angle = 30 degrees, NO SPIKE LICR-BA21TA35 Injection OD = 6.5 um, bevel angle = 21 degrees, tip length = 0.6 mm, tip bend angle = 35 degrees, NO SPIKE LICR-OD5 Injection OD = 5 um, NO SPIKE LICR-OD8 Injection OD = 8 um, FOR LARGE SPERM LICR-OD10 Injection OD = 10 um, FOR LARGE SPERM LICR-RT Injection Steeper taper (more rigid tip) LICR-TA35-RT Injection Steeper taper (more rigid tip), tip bend angle = 35 degrees LICR-SBS Injection SHORT SPIKE LICR-TL1.5 Injection Tip length = 1.5 mm SIS Injection STRAIGHT (unbent) LBC-OD15BA90 Embryo Biopsy OD = 15 um, no bevel LBC-OD20BA90 Embryo Biopsy OD = 20 um, no bevel LBC-OD27BA90 Embryo Biopsy OD = 27 um, no bevel LBC-OD32TA35 Embryo Biopsy OD = 32 um, tip bend angle = 35 degrees, no bevel LBC-OD35TA35 Embryo Biopsy OD = 35 um, tip bend angle = 35 degrees, no bevel LBCR-OD40TL1.5 Embryo Biopsy OD = 40 um, tip length = 1.5 mm LDC-TA35 Zona Drilling Tip bend angle = 35 degrees LDC-OD9TA35 Zona Drilling OD = 9 um, Tip bend angle = 35 degrees OD = outer diameter, ID = inner diameter. Z-SHAPED PIPETTES These pipettes are for low angle entry. They are 80 mm in length and have a 4-7 mm tip length and two bends of 100 degrees. All 5 types of pipettes can be manufactured as Z-shaped pipettes. Availability is limited. Please contact us for information about Z-shaped pipettes.